Announcement

Collapse
No announcement yet.

Tooling compleated and EP produced

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tooling compleated and EP produced

    Recently arrived for assembly, testing and approvals is an example of our new O gauge Sentinel model.
    As always comments are welcome
    Regards
    Andy

    Dapol Staff Member

  • #2
    Hi I've been asked by @Super Sentinel
    about tooling variations and thought it best to respond on here since I'm sure others have similar questions.
    We have tooled for:
    • All variants of cab grills
    • Long and short water fillers
    • Centre and 'side' fill sand boxes
    • Vertical and horizontal whistle
    • 'Corner' handrails and foot step/ neither
    • Vacuum fitted/Un-fitted,
    • 1 & 2 injectors
    • BR numberplate
    This will cover a good few models and the tooling has been designed so that further variants can be produced should it be needed.
    Regards
    Andy

    Dapol Staff Member

    Comment

    Working...
    X