Announcement

Collapse
No announcement yet.

Fitting light bar to Maunsell coaches

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Product Question: Fitting light bar to Maunsell coaches

    How do I get inside the n gauge Maunsell coach to fit a light bar? The roof does not appear to prise off. I've removed the bogies and two other screws from the underside. The coach body became a little loose, but there was resistance when I tried to pull them apart, so I stopped.

    Thanking you in advance.

    PB

  • #2
    You just need to remove the *whole* body. Unclip the ends and then run a thumbnail between the bottom of the body and the running board and the long clips in the centre of the coach will part. It should come off fairly easily. I've fitted 16 lightbars and not had any issues removing or refitting the bodies.

    The instructions say that the lightbar will clip into the runners in the roof - they don't. I put a small blob of blu-tac near each end of the lightbar and wedge it between the runners, then plug the connector in and then reseat the body.

    Comment


    • #3
      Spot on Jeff - you're a star. Much appreciated

      PB

      Comment

      Working...
      X